March 16, 2014

Electromagnetic Fields (EMF) in High Voltage Power Lines

Have you ever wondered about the electromagnetic field around a high voltage power line? Well I have, quite often actually, but I never really found much information about it, at least online. Fortunately, I had to do a work about it, during my academic studies in 2012, it just asked for the EMF values for a constant height but I thought I should make it more interesting by varying the height and making the results a bit more dimensional.


The problem basically gave me the parameters of a specific transmission line and asked for the electromagnetic values at a constant height of 1.8 meters from ground (approximately the height of a person's head), considering that the person could move on the X axis of a transverse section of the power line.

March 12, 2014

Lamp Starter Blinking Lights

This is probably the most simple "project" I've ever tried, it's actually more like a small experiment than a project itself. I wanted an easy way to make light bulbs blink but I didn't want to waste a lot of time making a circuit and I wanted to use whatever I had laying around. So I decided to try a little trick:


I had plenty of fluorescent lamp starters and I thought, if this is a thermal switch, it should give me the blinking random effect that I wanted.

March 9, 2014

Laboratory ATX Power Supply Unit

Now this is a more recent project that I did back in 2012. As I started getting to work on electronics along came the need to have a decent power supply for my experiences, instead of always using different, cheap and weak power adapters. Since I had a few power supply units from old computers laying around, I thought I should modify one to fit my needs. They have a few different voltages available and can be quite powerful.


This was the final result. I wanted it to have a cool high-tech look so I painted the case all black and put some green LEDs inside.

March 5, 2014

Light Switch ON/OFF LED Indicator

When I was first learning electronics I was faced with a little problem. I wanted to have some kind of indicator to tell me if a certain light on a remote location would be ON or OFF. Sure, there are light switches with LED or neon indicators but none of them actually had one for the ON position and another for the OFF position.


I didn't know much yet so I went to talk with a teacher about it. He gave me this circuit for me to try:

March 3, 2014

KITT Voice Box Circuit

So, let me start from the beginning. This, was one of the very first circuits I ever made, back in 2006. As a properly 90's kid, I grew up with some really nice TV influences like MacGyver and Knight Rider, therefore, one of the first things I wanted to do when I started learning about electronics was the KITT voice box.

 

By this time, I didn't know much yet, I must mention that I didn't even know what a breadboard was. The only thing I did know, was a perfboard, so that's exactly what I used and I must say, it was a headache!